សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 06 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 11:41 យប់
To set the schedule on the INTERMATIC ET2145CP Electronic Timer Controlអនុវត្តតាមជំហានទាំងនេះ៖
1. Press the "MODE" button to select the desired mode of operation (24-hour or 7-day).
2. Use the arrow buttons to navigate to the desired day or time slot.
3. Press the "SET" button to enter the programming mode for that day or time slot.
4. Use the arrow buttons to set the desired ON time.
5. Press the "SET" button again to set the OFF time.
6. Repeat steps 3-5 for each day or time slot you want to program.
7. Press the "MODE" button to exit the programming mode.
សម្រាប់ការណែនាំលម្អិតបន្ថែម និងឧamples, please refer to the user manual of the INTERMATIC ET2145CP Electronic Timer Control, which can be found at the following link: [Link to the manual](http://waterheatertimer.org/Intermati...)
បន្ថែមមតិយោបល់ថ្មី។