សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 06 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 10:43 យប់
ដើម្បីដំឡើង STAHL 210733 ការភ្ជាប់ឧបករណ៍ភ្ជាប់ដោត miniCLIXសូមអនុវត្តតាមជំហានទាំងនេះ៖
1. ត្រូវប្រាកដថាការផ្គត់ផ្គង់ថាមពលត្រូវបានបិទមុនពេលចាប់ផ្តើមដំណើរការដំឡើង។
2. Identify the cable that needs to be connected to the plug connector coupling.
3. Strip the insulation from the cable to expose the conductors.
4. If using a crimp terminal, insert the stripped conductors into the appropriate crimp terminal and use a crimping tool to secure the connection. If using a spring clamp terminal, insert the stripped conductors into the appropriate terminal and ensure they are securely held in place.
5. Insert the cable with the connected terminal into the miniCLIX plug connector coupling.
6. Ensure that the cable is properly aligned with the coupling and push it in until it is fully inserted.
7. If necessary, use the recommended strain relief accessory (part number 154585) to secure the cable and provide additional protection.
8. Once the cable is securely connected, you can turn on the power supply.
Please note that this is a general guide for installing the miniCLIX plug connector coupling. For specific instructions and safety precautions, it is recommended to refer to the product manual provided by R. STAHL Schaltgeräte GmbH.
បន្ថែមមតិយោបល់ថ្មី។