សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 04 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 10:09 យប់
ដើម្បីដំឡើងអ្នកគាំទ្របន្ថែមនៅក្នុង Sharkoon RGB Wave ATX Caseអនុវត្តតាមជំហានទាំងនេះ៖
1. Determine the desired location for the additional fans. The top panel of the case provides an optional location for two additional fans with a diameter of either 120 mm or 140 mm.
2. If you have chosen to install fans on the top panel, remove the top panel by unscrewing the screws holding it in place.
3. Align the xxxx holes of the additional fans with the corresponding mounting holes on the top panel.
4. Secure the fans in place using screws, ensuring they are tightly fastened.
5. If you have removed the top panel, reattach it by aligning it with the case and tightening the screws.
6. ភ្ជាប់ខ្សែកង្ហារទៅនឹងក្បាលកង្ហារដែលសមស្របនៅលើ motherboard ឬឧបករណ៍បញ្ជាកង្ហាររបស់អ្នក។
7. Power on your system and ensure that the additional fans are spinning and functioning properly.
សូមយោងទៅ Sharkoon RGB Wave ATX Case manual for more detailed instructions and illustrations on fan installation.
បន្ថែមមតិយោបល់ថ្មី។