សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 04 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 09:38 យប់
ដើម្បីជ្រើសរើសអាសយដ្ឋានម៉ូឌុលសម្រាប់ ម៉ូឌុលពង្រីកទំនាក់ទំនង Shinko QMC1-Cអនុវត្តតាមជំហានទាំងនេះ៖
1. Locate the module address selection rotary switch on the module.
2. Use a small flat-blade screwdriver to select the module address.
3. For the QMC1- -0 [Console selection (MODBUS RTU/SIF)], the value obtained by adding 1 to the value of the selected rotary switch becomes the module address. The module address ranges from 0 to F (1 to 16).
4. For the QMC1- -1 (C series compatible), the value of the selected rotary switch becomes the module address. The module address ranges from 0 to F (0 to 15).
Note: The module address selection is required to communicate with the host computer or PLC. Make sure to select a unique module address for each module connected in the system.
បន្ថែមមតិយោបល់ថ្មី។