សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 04 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 11:24 ព្រឹក
ដើម្បីវាស់វ៉ុល ACtage ដោយប្រើ ANENG M167 Smart Digital Multimeterសូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Ensure that the multimeter is turned off before starting the measurement.
2. Insert the measuring pen into the corresponding AC voltage measurement jack on the multimeter. The red pen should be inserted into the VΩmA jack and the black pen into the COM jack.
3. បើក multimeter ដោយចុចប៊ូតុងថាមពល។
4. Set the rotary dial to the AC voltage measurement mode. It is usually denoted by the symbol "~" or "V~" on the dial.
5. Hold the measuring pens and touch the test leads to the points where you want to measure the AC voltage. Ensure proper contact and avoid touching any live wires with your hands.
6. Read the measured AC voltage value on the LCD screen. The backlight feature can be used to enhance visibility in low-light conditions.
7. After completing the measurement, turn off the multimeter to conserve battery power.
Please refer to the user manual (included in the packaging) for more detailed instructions and safety precautions.
បន្ថែមមតិយោបល់ថ្មី។