សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 01 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 01:52 ព្រឹក
ដើម្បីកំណត់អាសយដ្ឋាន DMX សម្រាប់ ប្រព័ន្ធភ្លើង AUDIBAX Waco Prolife 300Tអនុវត្តតាមជំហានទាំងនេះ៖
1. Press the MENU button on the fixture to enter the main menu interface.
2. Use the UP or DOWN button to select the Addressing menu and press ENTER.
3. In the Addressing menu, select the Mode submenu.
4. Choose either the 2 Channels Mode or 5 Channels Mode, depending on your desired control configuration.
5. Set the DMX address by adjusting the channel number using the rotary xxxx or buttons on the fixture.
- In the 2 Channels Mode, the DMX address controls the dimmer and color temperature functions.
- In the 5 Channels Mode, the DMX address controls the dimmer, strobe, warm white, cold white, and color temperature functions.
Note: Each fixture should be assigned a unique DMX address to ensure that the control signals are correctly received. You can set the same address for multiple fixtures if you want them to respond to the same control signal.
សូមយោងទៅ ប្រព័ន្ធភ្លើង AUDIBAX Waco Prolife 300T user manual for more detailed instructions and information on the DMX protocol and control options.
បន្ថែមមតិយោបល់ថ្មី។