សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 01 ខែមីនា ឆ្នាំ 2025 - ម៉ោង 12:20 ព្រឹក
ដើម្បីជ្រើសរើសទិន្នផលវ៉ុលtage សម្រាប់ AL600ULXD power supply charger, you need to adjust the switch position on the unit. Here are the steps:
1. Locate the switch labeled "SW1" on the power supply board.
2. If you want a 12VDC output, switch SW1 should be in the ON position.
3. If you want a 24VDC output, switch SW1 should be in the OFF position.
Make sure to set the switch to the desired position before connecting any devices to the power supply.
បន្ថែមមតិយោបល់ថ្មី។