ចម្លើយ

ថ្ងៃទី 28 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 06:43 ព្រឹក
ដើម្បីកំណត់ឡើងវិញ បន្ទះ LCD TFT ស៊េរី Surenoo STP0240A2-240320, you need to apply a signal to the RESET pin. The RESET pin is used to properly initialize the chip. The signal should be active low, meaning it should be set to a low voltage level to reset the device. Please refer to the user manual for the specific pin configuration and voltage levels required for the RESET pin.
បន្ថែមមតិយោបល់ថ្មី។