សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 28 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 01:11 ព្រឹក
To connect the backlight of the បន្ទះអេក្រង់ LCD TFT ស៊េរី Surenoo STP0177D-128160, you will need to use the LED-K and LED-A pins on the display. The LED-K pin is the cathode of the backlight, and the LED-A pin is the anode of the backlight. The typical voltage for the backlight is 2.9V to 3.3V, with a typical value of 3.1V. Connect the LED-K pin to the cathode of your backlight power supply and the LED-A pin to the anode of your backlight power supply. Make sure to observe the correct polarity when connecting the backlight.
បន្ថែមមតិយោបល់ថ្មី។