សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 12:35 ព្រឹក
ដើម្បីដំឡើង Lightcloud LCBT8-14-48P-8TW-DIR-SS LED Linear T8 Tube Ballast ដែលត្រូវគ្នាអនុវត្តតាមជំហានទាំងនេះ៖
1. Turn off power: Place the wall switch in the off position and turn off the main power at the breaker panel or remove the fuse from the fuse box.
2. Find a suitable location: The Lightcloud Blue devices should be positioned within 60 ft. of each other. If there are building materials such as brick, concrete, or steel construction, additional Lightcloud Blue devices may be required to extend around an obstruction.
3. Remove lens or diffuser (if applicable): Remove the existing fluorescent lamps ពី luminaire ។
4. Insert the LED lamp: Bring the LED lamp ទៅ luminaire ហើយបញ្ចូល lamp ម្ជុលចូលទៅក្នុង luminaire lamp holders. Rotate the LED lamp until it locks in place. Ensure that the LED lamp ចំណុចខាងមុខឆ្ងាយពីខាងក្រោយនៃអំពូលភ្លើង។
5. Place lens or diffuser back in place (if applicable).
សម្រាប់ការណែនាំលម្អិត និងរូបភាពបន្ថែម សូមមើល គេហទំព័រ Lightcloud LCBT8-14-48P-8TW-DIR-SS LED Linear T8 Tube Ballast សៀវភៅណែនាំអ្នកប្រើប្រាស់ដែលត្រូវគ្នា.
Note: It is important to follow all safety precautions mentioned in the manual, such as disconnecting power before installation and not using the lamp in wet locations or with standard dimmers and emergency ballasts.
បន្ថែមមតិយោបល់ថ្មី។