សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 05:46 ព្រឹក
ដើម្បីបន្ថែម EVA LOGIK ZW38S Z-Wave Mini Plug in Socket ទៅកាន់បណ្តាញ Z-Wave របស់អ្នក សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Make sure your Z-Wave certified controller is ready to add a device to the network.
2. Press the Manual/Program button on the smart plug three times quickly. The blue LED on the plug will blink quickly.
3. If your Z-Wave certified controller features remote access, you can now control the plug from your mobile devices.
4. If you have issues with pairing or including the device, move it as close as possible to the hub and try again. You can move it to the desired location once it is successfully added to the network.
Note: If the manual button doesn't light up after being pressed three times, you can reset the device by clicking the button twice quickly and then holding it for at least 10 seconds. This operation can be done when manual control is functional, and a single press can turn the lamp បើក ឬបិទ។
សម្រាប់ការណែនាំលម្អិតបន្ថែម និងការដោះស្រាយបញ្ហា សូមមើលសៀវភៅណែនាំអ្នកប្រើប្រាស់ដែលបានផ្តល់ជាមួយផលិតផល។
បន្ថែមមតិយោបល់ថ្មី។