សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 02:26 ព្រឹក
To adjust the equalizer on the AudioControl Three.2 In-Dash System Controllerអនុវត្តតាមជំហានទាំងនេះ៖
1. Locate the stereo graphic equalization bands on the Three.2. There are three frequency controls set at 125Hz, 1.25KHz, and 10KHz respectively.
2. Use these frequency controls to make adjustments to your system's sound. The frequencies were selected to provide you with enough control to make dramatic improvements in any system.
3. Depending on your preference and the type of music you are listening to, you can boost or cut the frequencies using the equalizer controls. For example, if you want more mid-bass kick, you can try adjusting the 125Hz xxxx . If vocals need boosting or toning down, you can use the 1.25KHz controls. The 10KHz control allows you to adjust the higher frequencies.
4. Experiment with different settings to find the sound that suits your preference and the type of music you are listening to. There are no specific guidelines for setting the equalizer controls, as music can sound different to different individuals.
5. Take note that the equalizer controls on the Three.2 are designed to provide you with enough control to make improvements in your system's sound. Adjust the equalizer to your liking and enjoy the enhanced audio experience.
For more detailed information and instructions, please refer to the AudioControl Three.2 In-Dash System Controller Owner's Manual.
បន្ថែមមតិយោបល់ថ្មី។