សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 24 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 12:14 ព្រឹក
ដើម្បីកំណត់ឡើងវិញ TP-Link VIGI Wi-Fi Network Camera to its factory settings, follow these steps:
1. Rotate the sphere and unfasten the two fixed screws to remove the cover of the camera.
2. កំណត់ទីតាំងប៊ូតុងកំណត់ឡើងវិញនៅលើកាមេរ៉ា។
3. Long press the reset button until the Status LED starts blinking red quickly.
4. លែងប៊ូតុងកំណត់ឡើងវិញ។
5. Wait for the camera to reset to its factory settings. This may take a few moments.
6. Once the camera has reset, you can set it up again using the TP-Link VIGI app or other management methods mentioned in the user guide.
Note: Resetting the camera will erase all previous settings and configurations. Make sure to back up any important data or settings before performing a reset.
បន្ថែមមតិយោបល់ថ្មី។