សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 22 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 03:42 ព្រឹក
ដើម្បីកំណត់ឡើងវិញ unpolite device to its factory settings, follow these steps:
1. Locate the hardware reset button on the device.
2. Using a paper clip or similar tool, press and hold the hardware reset button. This will trigger a power cycle.
3. After the device has booted up, press the factory reset button three times within 2 seconds. The factory reset button is also located on the device.
4. The device will restore the following settings to their default values:
- Modbus baudrate
- BACnet saved MAC address
- Wi-Fi MQTT broker setting (for Wi-Fi model)
Please note that performing a factory reset will erase any custom settings or configurations you have made on the device.
បន្ថែមមតិយោបល់ថ្មី។