សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 21 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 09:18 យប់
ដើម្បីផ្គូផ្គង aranet transmitter with the base station, you can follow either Option 1 or Option 2 as described in the user guide.
Option 1: Pairing with batteries (recommended)
1. Ensure you have the transmitter and 1x AA battery ready.
2. Unscrew and remove the transmitter's lid.
3. បើកកម្មវិធី Sensorhub នៅលើកុំព្យូទ័ររបស់អ្នក (ត្រូវប្រាកដថាអ្នកមានកម្មវិធីបង្កប់ចុងក្រោយបំផុត)។
4. In the "SENSORS" section, choose your preferred measurement interval.
5. ចុចប៊ូតុង "PAIR SENSOR" នៅលើអេក្រង់កុំព្យូទ័រ។
6. បញ្ចូលថ្មភ្លាមៗទៅក្នុងឧបករណ៍បញ្ជូន ឬបញ្ចូលថ្ម ហើយចុចប៊ូតុង "ផ្គូផ្គង" នៅជ្រុងខាងឆ្វេងរបស់ឧបករណ៍បញ្ជូន។
7. The sensor will be paired and appear in the "SENSORS" category.
8. Complete your sensor setup and xxxx the lid back onto the transmitter.
Option 2: Pairing with mains power, without batteries
1. Connect the power cable to the transmitter.
2. Unscrew and remove the transmitter's lid.
3. Connect the transmitter to the power mains.
4. បើកកម្មវិធី Sensorhub នៅលើកុំព្យូទ័ររបស់អ្នក (ត្រូវប្រាកដថាអ្នកមានកម្មវិធីបង្កប់ចុងក្រោយបំផុត)។
5. In the "SENSORS" section, choose your preferred measurement interval.
6. ចុចប៊ូតុង "PAIR SENSOR" នៅលើអេក្រង់កុំព្យូទ័រ។
7. Click the "PAIRING" button on the transmitter's left corner.
8. The sensor will be paired and appear in the "SENSORS" category.
9. Complete your sensor setup and xxxx the lid back onto the transmitter.
Please note that the transmitter must be near the base station (within a maximum distance of 20 meters) during the pairing process. If you encounter any difficulties, you can contact support@aranet.com for assistance.
For more detailed information about aranet products, you can visit aranet.com, contact your aranet representative, or write to info@aranet.com.
បន្ថែមមតិយោបល់ថ្មី។