សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 21 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 03:14 ព្រឹក
ដើម្បីភ្ជាប់របស់អ្នក។ Procella audio DA08-DSP Power Ampកាន់តែចាស់ ទៅកាន់ប្រព័ន្ធអូឌីយ៉ូរបស់អ្នក សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. ត្រូវប្រាកដថា amplifier is turned off before making any connections.
2. Use balanced XLR cables to connect the audio source to the XLR inputs on the ampកាន់តែចាស់។
3. Connect your speakers to the heavy-duty binding posts on the amplifier. Use two-wire stereo or mono speakers.
4. If you want to control the amplifier remotely, connect an RJ45 Ethernet cable to the Ethernet port on the ampកាន់តែចាស់។
5. Once all the connections are made, turn on the amplifier by flipping the power switch to the "On" position.
Note: It is recommended to use shielded cables for the lowest noise floor. If a single-ended connection is necessary, use the shortest possible cable to minimize potential noise.
For more detailed instructions and information, please refer to the "Connections" section of the Procella audio DA08-DSP Power Ampសៀវភៅណែនាំអ្នកប្រើប្រាស់ lifier ។
បន្ថែមមតិយោបល់ថ្មី។