សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 18 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 02:08 ព្រឹក
To add a new fingerprint to the eSSL FL100 M Intelligent Fingerprint Door Lockអនុវត្តតាមជំហានទាំងនេះ៖
1. Access the Administrator Settings by touching the screen keypad for lights on and pressing # for 2 seconds. Then press 1 for Administrator settings.
2. Press 1 again for the addition of a Master User.
3. To add a fingerprint as a Master User, scan the fingerprint five times on the fingerprint scanner. After successful addition, a voice prompt will say "1X1X Successful," where 1X1X represents the serial number of the registered user.
4. To go back to the main menu, press *.
Note: All fingerprints need to be scanned five times for addition.
បន្ថែមមតិយោបល់ថ្មី។