សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 18 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 01:27 ព្រឹក
ដើម្បីភ្ជាប់ master Easy kvm-tec First Air KVM extender over IPសូមអនុវត្តតាមជំហានទាំងនេះ៖
1. ភ្ជាប់ CON/Remote Unit និង CPU/Local Unit ទៅនឹងការផ្គត់ផ្គង់ថាមពល 12V 1A ដែលរួមបញ្ចូល។
2. Connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU/Local Unit. Connect your keyboard and mouse to the CON/Remote Unit.
3. ប្រើខ្សែបណ្តាញដើម្បីភ្ជាប់ CPU/Local Unit និង CON/Remote Unit។
4. Connect the DVI cable from the DVI socket of your PC to the DVI socket of the CPU/Local Unit (PC-in).
5. Connect another DVI cable from the DVI socket of your PC to the DVI socket of the CPU/Local Unit (PC-in 2). Then connect your monitor to the CON/Remote Unit using a DVI cable.
6. Connect the PC audio/out to the local audio/in using an audio cable. Connect the audio/out to the microphone using another audio cable.
7. Finally, if you are using a switch, connect all endpoints to the switch. Make sure that all connections have a bandwidth of 1Gbit/sec. For video sharing, the network needs to support IGMP snooping.
Please refer to the master Easy kvm-tec First Air Installation Guide for more detailed instructions and diagrams. You can download the manual from the kvm-tec webគេហទំព័រ ឬទាក់ទងក្រុមគាំទ្ររបស់ពួកគេសម្រាប់ជំនួយ។
បន្ថែមមតិយោបល់ថ្មី។