សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 15 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 02:36 ព្រឹក
To rack mount the កំណែ Omnia VOLT AM Broadcast Audio Processorអនុវត្តតាមជំហានទាំងនេះ៖
1. Gather the necessary items for installation, including the Omnia VOLT Audio Processor, AC Power Cable, RJ45 Studio Hub standard pinout AES Adaptors, 4 rack screws, a rack with an EIA rack space for mounting, and a Philips screwdriver or xxxx gun.
2. Install the VOLT in your equipment rack using the 4 supplied screws. If only two screws are used for installation, they MUST be installed in the bottom holes of the rack ears. Leave a blank space above and below the unit for proper ventilation and cooling.
3. Once the VOLT is securely mounted in the rack, proceed to the audio connections.
Note: For more detailed instructions and illustrations, please refer to the Omnia VOLT AM Version Broadcast Audio Processor Installation Guide provided with the product.
បន្ថែមមតិយោបល់ថ្មី។