សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 15 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 02:20 ព្រឹក
ការដំឡើងរបស់ កាមេរ៉ាបម្រុងទុកឥតខ្សែ AUTO-VOX CS-2 is simple and can be done in two steps. Here is a step-by-step guide:
ជំហានទី 1: ការដំឡើងកាមេរ៉ា
- Choose a suitable location on the rear of your vehicle to mount the camera. It should provide a clear view នៃតំបន់ខាងក្រោយរថយន្ត។
- Clean the mounting surface and attach the camera using the provided screws or adhesive.
- Adjust the camera angle to ensure optimal visibility.
Step 2: Connecting the Camera and Display
- Connect the red wire of the camera to the positive terminal of your vehicle's reverse light. This will power the camera when you engage the reverse gear, and the rearview image will immediately appear on the display.
- If you want to use the camera for continuous monitoring, connect the camera's red wire to a continuous power source, such as the vehicle's fuse box or a separate power outlet.
- Connect the black wire of the camera to the vehicle's ground or a metal surface for proper grounding.
- Power the display by plugging it into the provided cigarette lighter or fuse box adapter.
Once the camera and display are connected, the wireless transmission will automatically establish a stable signal. You can now use the កាមេរ៉ាបម្រុងទុកឥតខ្សែ AUTO-VOX CS-2 for parking, reversing, or monitoring purposes.
សម្រាប់ការណែនាំលម្អិតបន្ថែម និងរូបភាព សូមយោងទៅសៀវភៅណែនាំអ្នកប្រើប្រាស់ដែលបានផ្តល់ជាមួយផលិតផល។
បន្ថែមមតិយោបល់ថ្មី។