សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 14 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 09:33 យប់
ដើម្បីដំឡើង ការជូនដំណឹង NRX-M711 ម៉ូឌុលបញ្ចូល-លទ្ធផលប្រព័ន្ធវិទ្យុអនុវត្តតាមជំហានទាំងនេះ៖
1. Remove the 2 screws from the front cover to reveal the RF module.
2. Remove the RF module from the back box.
3. xxxx the back box to the desired position on the wall using the fixings provided.
4. Refit the module in the box.
5. Wire the plug-in terminals as required by the system design.
6. Refit the front cover to protect the module.
Note: When installing the module, make sure to follow all relevant codes and regulations. The spacing between radio system devices should be a minimum of 1m.
For more detailed installation instructions, refer to the "Module installation instructions" and "SMB500 back box installation instructions" provided in the package.
សូមយោងទៅ ការជូនដំណឹង NRX-M711 ម៉ូឌុលបញ្ចូល-លទ្ធផលប្រព័ន្ធវិទ្យុ Instruction Manual for further information and illustrations.
បន្ថែមមតិយោបល់ថ្មី។