សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 09 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 10:38 យប់
There are two alternative ways to connect to or set the device’s management IP address: using the pre-set management IP address or connecting a monitor and keyboard to the server.
1. ការប្រើប្រាស់អាសយដ្ឋាន IP គ្រប់គ្រងជាមុន:
- Connect a PC directly to the device’s management port using an Ethernet cable.
- Set the PC’s IP address to 10.0.20.100 and the subnet mask to 255.255.0.0.
- បើក ក web browser and enter the IP address 10.0.20.101 to access the web ចំណុចប្រទាក់អ្នកប្រើ។
2. ការភ្ជាប់ Monitor និង Keyboard ទៅ VB440-Appliance៖
- Connect a monitor and keyboard directly to the server.
- Login to Linux using the default credentials: username "root" and password "mpeg101".
- Use the nmtui tool to edit the network connections and set the appropriate network settings.
- Save and quit nmtui, then reboot the server using the "reboot" command.
- Once the server reboots, the web user interface can be accessed using the IP address that was set for the management port.
Note: For more detailed instructions and additional configuration options, please refer to the full user manual of the Sencore VB440-Appliance.
បន្ថែមមតិយោបល់ថ្មី។