សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 07 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 03:17 ព្រឹក
To replace the antenna on the n-com SPCOM00000026សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. ដកប្រព័ន្ធ N-Com ចេញពីមួកសុវត្ថិភាព ដូចមានការណែនាំក្នុងសៀវភៅណែនាំដែលបានផ្តល់។
2. Open the e-box by unscrewing the xxxx and removing the connector cover (refer to Fig. 1-3 in the manual).
3. Disconnect the antenna connector (refer to Fig. 4-5).
4. Place the new antenna inside the plastic box (e-box) (refer to Fig. 6).
5. Connect the new antenna to the antenna connector.
6. xxxx the connector cover back in place.
7. Close the e-box (refer to Fig. 7).
8. Reposition the N-Com system inside the helmet following the instructions in the provided instruction booklet.
Please note that it is essential to refer to the instruction manual specific to your n-com SPCOM00000026 model for accurate guidance and illustrations.
បន្ថែមមតិយោបល់ថ្មី។