សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 06 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 11:02 ព្រឹក
Refilling the butane tank in the LEXIVON LX-771 Butane Torch ឧបករណ៍ពហុមុខងារ គឺជាដំណើរការដ៏សាមញ្ញមួយ។ នេះជាជំហានដែលត្រូវអនុវត្តតាម៖
1. Ensure that the torch is completely cool and that the flame is extinguished.
2. Locate the refill valve on the bottom of the torch. It is usually a small hole with a xxxx -like cap.
3. Hold the butane canister upside down and align the nozzle with the refill valve on the torch.
4. Press the butane canister firmly onto the refill valve and apply downward pressure.
5. The butane will start to flow into the torch. Refill the tank for about 10-15 seconds or until it is full.
6. Once the tank is full, release the pressure on the butane canister and remove it from the refill valve.
7. Allow a few minutes for the butane to stabilize before using the ពិល ម្តងទៀត។
It is important to follow these steps carefully to ensure a successful refill. Always use high-quality butane fuel and avoid overfilling the tank. Refer to the user manual for any specific instructions or safety precautions provided by the manufacturer.
បន្ថែមមតិយោបល់ថ្មី។