សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 06 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 05:58 ព្រឹក
ដើម្បីដំឡើង ឧបករណ៍ពិដាន LED អាតូមទំនើប ULTRALUXសូមអនុវត្តតាមជំហានដែលបានរៀបរាប់នៅក្នុងការណែនាំអំពីការដំឡើងដែលបានផ្តល់ជាមួយផលិតផល។ នេះគឺជាសេចក្តីសង្ខេបនៃដំណើរការដំឡើង៖
1. Before starting the installation, make sure to shut off the main electrical supply from the main fuse box or circuit breaker.
2. Remove the contents from the box and ensure that no parts are missing. Refer to the illustration steps included in the instruction manual.
3. Pull the supply wires (white and black) and the supply ground wire out from the junction box.
4. Remove the mounting bracket from inside the canopy and place it over the junction box, aligning the slots of the bracket with the xxxx holes in the junction box. Secure the mounting bracket to the junction box using the provided mounting screws.
5. Make the following wire connections using wire nuts:
- ភ្ជាប់ខ្សែផ្គត់ផ្គង់ពណ៌ស (អព្យាក្រឹត/ទូទៅ) ទៅនឹងខ្សែភ្លើងពណ៌ស។
- ភ្ជាប់ខ្សែផ្គត់ផ្គង់ខ្មៅ (ខ្សែ) ទៅនឹងខ្សែភ្លើងខ្មៅ។
- ភ្ជាប់ខ្សែដីផ្គត់ផ្គង់ទៅនឹងខ្សែដី។
6. If necessary, wrap all wire connections in electrical tape to ensure a secure connection.
7. ដោតខ្សែភ្លើងទាំងអស់ត្រឡប់មកវិញដោយប្រុងប្រយ័ត្នទៅក្នុងប្រអប់ប្រសព្វ។
8. Align the xxxx holes at the top of the canopy with the holes in the mounting bracket. Attach the canopy to the mounting bracket by feeding the fixture screws through the holes of the canopy and into the holes of the bracket. Tighten the fixture screws securely.
9. Restore power at the fuse box or circuit breaker. Check the operation of the integrated LED fixture and adjust the LED lights in the desired pattern.
10. ការដំឡើងត្រូវបានបញ្ចប់។
សូមចំណាំថានេះជាការបញ្ចប់ទូទៅview of the installation process. For more detailed instructions and illustrations, refer to the ULTRALUX Modern LED Atom Ceiling Fixture Installation Guide provided with the product.
បន្ថែមមតិយោបល់ថ្មី។