សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 06 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 02:41 ព្រឹក
ដើម្បីភ្ជាប់ឧបករណ៍ទៅអេ Altronix PD4ULCB power distribution moduleអនុវត្តតាមជំហានទាំងនេះ៖
1. Mount the PD4ULCB in the desired location or enclosure using the included mounting hardware. Refer to the Sub-Assembly Installation Instruction for mounting details.
2. Connect the desired power supply output to the terminals marked [INPUT]. The left terminal is NEG (-), and the right terminal is POS (+). Ensure that the voltage នៃការផ្គត់ផ្គង់ថាមពលត្រូវគ្នានឹងវ៉ុលបញ្ចូលtage specified in the specifications section of the manual.
3. Before connecting devices, measure the output voltage to avoid potential damage. Use a multimeter or voltage tester to ensure the output voltage គឺស្ថិតនៅក្នុងជួរដែលត្រូវការ។
4. Connect the devices to be powered to the terminal pairs 1 to 4, marked [1P - 1N] through [4P - 4N]. All terminals with a common suffix "P" (1P, 2P, etc.) are the same polarity. Make sure to connect the positive (+) terminal of the device to the corresponding positive terminal on the power distribution module and the negative (-) terminal to the corresponding negative terminal.
Note: The Altronix PD4ULCB is a UL Listed Sub-Assembly designed for use with Altronix UL Listed power supplies. Ensure that you are using it with compatible power supplies as indicated in the installation manuals for the power supply.
Please refer to the Altronix PD4ULCB UL Listed Sub-Assembly Power Distribution Module Instruction Manual for more detailed instructions and safety precautions.
ថ្ងៃទី 06 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 02:53 ព្រឹក
ដើម្បីភ្ជាប់ឧបករណ៍ទៅអេ Altronix PD4ULCB power distribution moduleអនុវត្តតាមជំហានទាំងនេះ៖
1. Mount the PD4ULCB in the desired location or enclosure using the included mounting hardware. Refer to the Sub-Assembly Installation Instruction for mounting details.
2. Connect the desired power supply output to the terminals marked [INPUT]. The left terminal is NEG (-), and the right terminal is POS (+). Ensure that the voltage នៃការផ្គត់ផ្គង់ថាមពលត្រូវគ្នានឹងវ៉ុលបញ្ចូលtage specified in the specifications section of the manual.
3. Before connecting devices, measure the output voltage to avoid potential damage. Use a multimeter or voltage tester to ensure the output voltage គឺស្ថិតនៅក្នុងជួរដែលត្រូវការ។
4. Connect the devices to be powered to the terminal pairs 1 to 4, marked [1P - 1N] through [4P - 4N]. All terminals with a common suffix "P" (1P, 2P, etc.) are the same polarity. Make sure to connect the positive (+) terminal of the device to the corresponding positive terminal on the power distribution module and the negative (-) terminal to the corresponding negative terminal.
Note: The Altronix PD4ULCB is a UL Listed Sub-Assembly designed for use with Altronix UL Listed power supplies. Ensure that you are using it with compatible power supplies as indicated in the installation manuals for the power supply.
Please refer to the Altronix PD4ULCB UL Listed Sub-Assembly Power Distribution Module Instruction Manual for more detailed instructions and safety precautions.
បន្ថែមមតិយោបល់ថ្មី។