សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 05 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 10:50 យប់
To connect LED fixtures to the Rayrun T140 RGBW LED Advanced RF Remote Controllerអ្នកនឹងត្រូវអនុវត្តតាមជំហានទាំងនេះ៖
1. Connect the LED common anode cable to the terminal marked with a '+' or a black cable.
2. Connect each channel LED cable to the relevant color cables.
3. ត្រូវប្រាកដថា LED បានវាយតម្លៃវ៉ុលtage គឺដូចគ្នានឹងការផ្គត់ផ្គង់ថាមពលវ៉ុលtage.
4. Ensure that each channel's maximum load current is below the controller's rated current.
5. CAUTION: Make sure that the output cables are well insulated from each other to prevent short circuits, as this could permanently damage the controller.
Please refer to the wiring diagram in the user manual for a visual representation of the connections.
បន្ថែមមតិយោបល់ថ្មី។