សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 03 ខែកុម្ភៈ ឆ្នាំ 2025 - ម៉ោង 08:59 យប់
ដើម្បីភ្ជាប់ S20 ការបង្វិល piezo stage ទៅកាន់ឧបករណ៍បញ្ជា សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Identify the connector on the S20. The driving cable interface is a 1-contact LEMO connector, and the sensor cable interface is a 4-contacts LEMO connector.
2. Use the provided dedicated cable from CoreMorrow to connect the S20 to the controller. The driving cable should be connected to the 1-contact LEMO connector on the S20, and the sensor cable should be connected to the 4-contacts LEMO connector on the S20.
3. ត្រូវប្រាកដថាការតភ្ជាប់មានសុវត្ថិភាព និងតឹង។
Note: Do not connect via an extension cable casually. If you need a longer cable, please contact CoreMorrow for assistance.
For further assistance or if you have any other questions, please contact CoreMorrow's customer service at the provided contact information.
បន្ថែមមតិយោបល់ថ្មី។