សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 31 ខែមករា ឆ្នាំ 2025 - ម៉ោង 10:33 យប់
ដើម្បីដំឡើង Ohsung Electronics OZ5-ZBM ម៉ូឌុល Zigbeeសូមអនុវត្តតាមការណែនាំខាងក្រោម៖
1. Ensure that the module is only installed by an ODM integrator. The end user should not attempt to remove or install the module themselves.
2. The module is limited to installation in mobile or fixed applications, as specified in Part 2.1091(b). Separate approval is required for all other operating configurations, including portable configurations and different antenna configurations.
3. The module should be mounted on the body using a SMD PAD PAD Pin map Pin Description Note.
4. Make sure to provide a minimum distance of 20 cm between the module's radiator and the user's body during installation and operation to comply with radiation exposure regulations.
Please refer to the Ohsung Electronics OZ5-ZBM Zigbee Module User Manual for more detailed instructions and guidelines on the installation process.
បន្ថែមមតិយោបល់ថ្មី។