សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 31 ខែមករា ឆ្នាំ 2025 - ម៉ោង 08:26 យប់
ដើម្បីដំឡើង NavAtlas NA82M Mirror Type Universal Command Centerអនុវត្តតាមជំហានទាំងនេះ៖
1. Place the rubber pad between the unit and the mounting bracket.
2. Align the bracket to the xxxx holes behind the unit.
3. Insert and tighten the 6mm screws.
4. Assemble the ring clamps and align them to the bracket, then use 6mm screws and tighten.
Note: The mounting bracket can be installed either upright or upside down depending on the application.
For more detailed instructions and illustrations, please refer to the "Installation Instructions" section on page 1 of the user guide.
បន្ថែមមតិយោបល់ថ្មី។