សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 31 ខែមករា ឆ្នាំ 2025 - ម៉ោង 02:59 ព្រឹក
ដើម្បីដំឡើង iGPSPORT SPD70 Dual Module Speed Sensor on your bicycleអនុវត្តតាមជំហានទាំងនេះ៖
1. Place the speed sensor on the front hub of your bicycle.
2. Tighten the strap around the hub and hook the speed sensor securely.
3. After installing the SPD70, check to ensure that the sensor does not slip.
4. Make sure the sensor is functioning properly and can achieve static sleep and motion wake.
5. Keep the sensor at least one meter away from magnetic materials such as magnets.
សម្រាប់ការណែនាំលម្អិតបន្ថែម សូមមើលសៀវភៅណែនាំអ្នកប្រើប្រាស់ដែលបានផ្តល់ជាមួយផលិតផល។
Note: It is important to install the CR2025 button battery before using the speed sensor. The battery installation process is described in the manual.
បន្ថែមមតិយោបល់ថ្មី។