សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 31 ខែមករា ឆ្នាំ 2025 - ម៉ោង 01:49 ព្រឹក
To set up a Wi-Fi network connection using the ម៉ូដឹមខ្សែ Wi-Fi ARRISអ្នកអាចអនុវត្តតាមជំហានទាំងនេះ៖
1. Install the Gateway:
- Connect the coaxial cable from the cable wall outlet or RF splitter to the Cable connector on the rear of your SBG10.
- Connect the Ethernet cable from your Ethernet-enabled device to an Ethernet port on the rear of your SBG10.
- Connect the power cord to the Power port on the rear of your SBG10 and plug it into an electrical wall outlet.
- Check the front panel LEDs to ensure all three LEDs are lit solid green.
2. Set Up a Wi-Fi Network Connection:
- Download the ARRIS SURFboard Manager Mobile App from the Apple App Store or Google Play Store using the provided QR code.
- Follow the prompts in the mobile app to configure your Wi-Fi network connection.
OR
- Access the Settings screen on your mobile device and select Wi-Fi, Wireless, or Connections.
- Make sure Wi-Fi or Wireless is turned on.
- Select the SBG10 Wi-Fi network from the list of available networks.
- Enter your Wi-Fi network password (set up during SBG10 activation) and select Join or Connect.
3. Test Your Wi-Fi Network Connection:
- Disconnect the Ethernet cable from your computer and SBG10 if connected.
- Open any web កម្មវិធីរុករកនៅលើកុំព្យូទ័ររបស់អ្នក។
- Type a valid URL (ឧ. គេហទំព័រ www.surfboard.com) នៅក្នុង web របារអាសយដ្ឋានកម្មវិធីរុករកហើយចុចបញ្ចូល។
For more detailed instructions and advanced settings, refer to the SURFboard SBG10 User Guide available online at the ARRIS Support webគេហទំព័រ។
Note: If you encounter any issues during the activation process, it is recommended to contact your service provider or ARRIS Technical Support for assistance.
បន្ថែមមតិយោបល់ថ្មី។