សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 29 ខែមករា ឆ្នាំ 2025 - ម៉ោង 03:54 ព្រឹក
To replace or upgrade the RAM in your iMac Intel 24 Inch EMC 2267អនុវត្តតាមជំហានទាំងនេះ៖
1. Lay your iMac front side down on a table with the lower edge facing yourself.
2. Loosen the single Phillips xxxx PH#2 in the center of the access door. This xxxx is captive in the access door.
3. Remove the access door from your iMac.
4. Use the sharp end of a spudger to pull the black plastic RAM tabs out of the memory bay.
5. Pull the black plastic RAM tab away from your iMac to eject the RAM chip.
6. Grab the RAM chip by its edges and pull it straight out of its slot.
7. If two RAM chips are installed, repeat this process for the other chip.
To reassemble your iMac, simply follow these instructions in reverse order.
For more detailed instructions and visuals, you can refer to the ការជំនួស RAM IFIXIT iMac Intel 24 អ៊ីញ EMC 2267 User Manual available on the iFixit webគេហទំព័រ (www.iFixit.com).
បន្ថែមមតិយោបល់ថ្មី។