សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 28 ខែមករា ឆ្នាំ 2025 - ម៉ោង 12:07 ព្រឹក
ដើម្បីកំណត់ឡើងវិញ LaView កាមេរ៉ាសុវត្ថិភាព 15MP LV-PWR4B ទៅការកំណត់លំនាំដើមរបស់រោងចក្រ សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Locate the reset button on the camera.
2. ចុចឱ្យជាប់ប៊ូតុងកំណត់ឡើងវិញរយៈពេល 5 វិនាទី។
3. After 5 seconds, the camera will return to factory default settings and you will hear a welcome ringtone.
4. Wait until the camera is beeping every 15 seconds, indicating that it is ready for pairing.
5. If the camera is not beeping, repeat the reset process.
Note: Resetting the camera will erase all previous settings and configurations.
ថ្ងៃទី 10 ខែកក្កដា ឆ្នាំ 2025 - ម៉ោង 10:11 យប់
To reset your LaView LV‑PWR15B camera, start by unplugging it from power. Locate the small reset button on the back of the camera. Using a pin or paperclip, press and hold the button for about 5 វិនាទី. You should hear a welcome tone, and the camera will begin beeping every 15 seconds—this means it's been reset and is in pairing mode.
If you don’t hear the tone, repeat the process to ensure the reset was successful. For an alternate method, unplug the camera, hold down the reset button, then plug it back in while still holding the button សម្រាប់អំពី 30 វិនាទី. The camera should reboot and return to default settings.
បន្ថែមមតិយោបល់ថ្មី។