សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែមករា ឆ្នាំ 2025 - ម៉ោង 03:47 ព្រឹក
To properly set up and secure your FHFFIRETRK071L Fraser Hill Farm Christmas Tree inflatableអនុវត្តតាមជំហានទាំងនេះ៖
1. Find a flat area of either grass or gravel for your inflatable. Avoid setting it up on a slope as it may prevent proper inflation and pose a safety hazard. Ensure the area is clear of leaves, loose dirt, and standing water.
2. Carefully remove the inflatable and included items from the box. Set aside the stakes, ropes, and clips for later use.
3. Lay the inflatable out on the ground with the fan located on the back side.
4. Make sure the deflation zipper on the back of the inflatable is closed. Plug the fan into a Class A GFCI-protected receptacle to start inflating the inflatable.
5. During the first inflation, help the inflatable inflate properly by ensuring all extremities are positioned correctly and untangling any twists. For taller inflatables, connect the tie downs to the upper fabric or metal loops before fully inflating.
6. Once fully inflated, locate all the tie-down points around the base. Insert stakes through the loops and press them about 2/3 of the way into the ground. These stakes help hold the inflatable upright and prevent it from being moved by the wind.
7. សម្រាប់អតិផរណាដែលមានកម្ពស់ក្រោម 9 ហ្វីត សូមដំឡើងយ៉ាងហោចណាស់បីចងខាងលើ។ សម្រាប់អតិផរណាដែលមានកម្ពស់លើសពី 10 ហ្វីត សូមដំឡើងចំណងខាងលើចំនួន 4 ឬច្រើនជាងនេះ អាស្រ័យលើទំហំនៃអតិផរណា។
8. Attach each rope to a clip and connect the clip to the upper fabric or metal loops. If clips are not included, tie each rope directly to the loop. Tie the ropes to additional ground stakes and secure them about 2/3 of the way into the ground.
9. ដើម្បីសម្រេចបានមុំ 45 ដឺក្រេត្រឹមត្រូវ ចម្ងាយភាគហ៊ុន (SD) ពីអតិផរណាគួរតែប្រហែលស្មើនឹងកម្ពស់រង្វិលជុំ (LH) នៅលើអតិផរណា។ សម្រាប់អតីតample ប្រសិនបើកម្ពស់រង្វិលជុំគឺ 6 ហ្វីត នោះភាគហ៊ុនគួរតែត្រូវបានដាក់នៅចម្ងាយ 6 ហ្វីតពីអតិផរណា។
10. To fully secure your inflatable, install the upper tie downs according to the provided graphic. Two of the side tie downs must angle forward by at least 30 degrees. Adjust stakes as needed to ensure the inflatable is fully upright and positioned correctly. Push all stakes fully into the ground when the inflatable is correctly positioned.
Remember to always read and follow the product setup instructions carefully and refer to the provided manual for any additional information or troubleshooting steps.
បន្ថែមមតិយោបល់ថ្មី។