សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 24 ខែមករា ឆ្នាំ 2025 - ម៉ោង 09:20 យប់
ដើម្បីភ្ជាប់ Jabra Link 400a USB-A DECT Adapter to your computerសូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Insert the USB-A connector of the Jabra Link 400a into an available USB port on your computer.
2. Wait for your computer to recognize the adapter and install any necessary drivers. This process may take a few moments.
3. Once the adapter is successfully connected, you can pair your headset with the Jabra Link 400a by following the manual pairing instructions mentioned earlier.
Please note that the Jabra Link 400a is a USB-A adapter, so make sure your computer has a USB-A port available for connection. If your computer only has USB-C ports, you may need to use a USB-C to USB-A adapter to connect the Jabra Link 400a.
បន្ថែមមតិយោបល់ថ្មី។