សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 23 ខែមករា ឆ្នាំ 2025 - ម៉ោង 02:17 ព្រឹក
ដើម្បីភ្ជាប់របស់អ្នក។ Sharp PG-M10X Smart Projector ទៅកាន់កុំព្យូទ័ររបស់អ្នក សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Ensure that both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on the back of the projector.
3. Connect one end of the VGA or HDMI cable to the corresponding port on the projector.
4. Locate the VGA or HDMI port on your computer.
5. Connect the other end of the VGA or HDMI cable to the corresponding port on your computer.
6. Turn on your computer and wait for it to boot up.
7. បើកម៉ាស៊ីនបញ្ចាំងដោយចុចប៊ូតុងថាមពល។
8. Use the Input button on the projector or the remote control to select the appropriate input source (VGA or HDMI) for your computer.
9. Once the input source is selected, your computer's display should appear on the projector screen.
Please note that depending on your computer's settings, you may need to adjust the display settings to ensure the projector is recognized as an external display. Refer to your computer's user manual for instructions on adjusting display settings.
សម្រាប់ព័ត៌មានលម្អិត និងគន្លឹះដោះស្រាយបញ្ហា សូមចូលទៅកាន់គេហទំព័រ Sharp PG-M10X Smart Projector Operation Manual ផ្តល់ជូននៅក្នុងតំណភ្ជាប់ខាងលើ។
បន្ថែមមតិយោបល់ថ្មី។