សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 21 ខែមករា ឆ្នាំ 2025 - ម៉ោង 03:45 ព្រឹក
To select the desired output voltage for the power supplyអនុវត្តតាមជំហានទាំងនេះ៖
1. Make sure the power cord is unplugged from the mains and there is no load connected to the unit.
2. Use the switching key to turn the voltage mode switch. The switch has seven voltage values printed in a circle around it.
3. Rotate the voltage mode switch until the arrow points to the voltage value that corresponds to the input voltage នៃបន្ទុករបស់អ្នក។
4. វ៉ុលtage mode switch should click into place, indicating that the desired output voltage ត្រូវបានកំណត់។
Note: It is important to turn on the output voltage only when there is no load connected to the power supply. Also, make sure to observe the operating voltage of the connected load to avoid any issues.
សូមមើលសៀវភៅណែនាំសម្រាប់ព័ត៌មានលម្អិត និងការប្រុងប្រយ័ត្នសុវត្ថិភាព។
បន្ថែមមតិយោបល់ថ្មី។