សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 21 ខែមករា ឆ្នាំ 2025 - ម៉ោង 02:16 ព្រឹក
ដើម្បីដំឡើង BOSE FreeSpace FS2C និង FS4CE Retrofit Kitសូមអនុវត្តតាមជំហានដែលបានរៀបរាប់នៅក្នុងការណែនាំអំពីការដំឡើងដែលបានផ្តល់។ នេះគឺជាសេចក្តីសង្ខេបនៃដំណើរការដំឡើង៖
1. Assembling the Tile Bridge:
- Align the rails and insert the tabs into the slots.
- Pull the rails outward to secure them together.
- If installing in a hard ceiling, assemble the tile bridge after inserting the assembled rails and ring through the hole cutout.
- Align the rails parallel to each other and press the tile bridge ring down to secure it to the rails.
2. Preparing Acoustic Ceiling Tile:
- Remove the existing loudspeaker from the ceiling and the ceiling tile.
- Remove the existing tile bridge if applicable.
- Place the assembled tile bridge across the ceiling grid, adjusting if necessary.
- Replace the tile in the ceiling.
3. Preparing Hard Ceiling (Existing Construction):
- Remove the existing loudspeaker from the ceiling and the existing tile bridge if applicable.
- Insert the tile bridge rails and ring through the hole and place the rails parallel to each other across the ceiling grid or ceiling furring.
- Assemble the tile bridge.
4. Using a Safety Cable:
- Some regional construction codes may require the use of a secondary securing mechanism.
- Bose recommends using a safety wire as a secondary securing mechanism.
- Follow the manufacturer's instructions for any secondary securing mechanism implemented.
5. ការដំឡើង៖
- Place the retrofit ring over the loudspeaker and flush against the loudspeaker baffle.
- Follow the loudspeaker installation guide for instructions on installing the loudspeaker.
- Refer to the provided figures in the manual for visual representations of the FreeSpace loudspeakers installed with retrofit kits.
សូមចំណាំថានេះជាការបញ្ចប់ទូទៅview of the installation process. For detailed instructions and safety precautions, please refer to the complete BOSE FreeSpace FS2C និង FS4CE Retrofit Kit ការណែនាំតំឡើង។
បន្ថែមមតិយោបល់ថ្មី។