សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 18 ខែមករា ឆ្នាំ 2025 - ម៉ោង 12:00 ព្រឹក
ដើម្បីភ្ជាប់ ម៉ាស៊ីនស្កេនរូបភាព Ricoh IS760 ទៅកាន់កុំព្យូទ័ររបស់អ្នក សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Ensure that your computer is powered on and running the appropriate operating system compatible with the scanner.
2. Locate the USB or Ethernet port on the back of the scanner. The specific port may vary depending on the model.
3. If you are using a USB connection:
a. Connect one end of the USB cable to the USB port on the scanner.
ខ. ភ្ជាប់ចុងម្ខាងទៀតនៃខ្សែ USB ទៅនឹងរន្ធ USB ដែលមាននៅលើកុំព្យូទ័ររបស់អ្នក។
4. If you are using an Ethernet connection:
a. Connect one end of an Ethernet cable to the Ethernet port on the scanner.
b. Connect the other end of the Ethernet cable to an available Ethernet port on your computer or network.
5. Once the physical connection is established, power on the scanner by pressing the power button located on the control panel or the scanner itself.
6. រង់ចាំឱ្យកុំព្យូទ័ររបស់អ្នកស្គាល់ម៉ាស៊ីនស្កេន។ វាអាចចំណាយពេលមួយសន្ទុះសម្រាប់កម្មវិធីបញ្ជាចាំបាច់ក្នុងការដំឡើង។
7. Once the scanner is recognized by your computer, you can proceed to install any additional software or drivers that may be required. Refer to the operating instructions or the included software installation guide for detailed instructions on installing the necessary software.
8. After the software installation is complete, you should be able to use the scanner with your computer. Open the scanning software or application on your computer and follow the instructions provided to begin scanning documents.
Note: For more detailed information on connecting the ម៉ាស៊ីនស្កេនរូបភាព Ricoh IS760 to your specific computer and operating system, please refer to the "Operating Instructions" manual provided with the scanner. The manual contains step-by-step instructions and illustrations to guide you through the setup process.
បន្ថែមមតិយោបល់ថ្មី។