សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 17 ខែមករា ឆ្នាំ 2025 - ម៉ោង 11:40 យប់
To register a new ID card using the YS-RFID2 ID Card Serial Port Reader Moduleអ្នកអាចអនុវត្តតាមជំហានទាំងនេះ៖
1. Connect the module to your computer or microcontroller using the TTL serial port.
2. Open the serial communication software or write a program to communicate with the module.
3. Send the command "Registration Card: Card 00@" to the module via the serial port. Replace "00" with the desired card number you want to register.
4. The module will respond with "Start Registering Card" and the indicator light will start flashing, indicating that it is ready to register a new card.
5. Bring the new ID card close to the module to complete the registration process.
6. Once the registration is completed, the module will respond with "Registration Complete" and the card number will be stored in the module's memory.
Note: If the card number you are trying to register has already been registered, it will overwrite the previous registration. Additionally, the module can store up to 35 ID cards, and if all slots are occupied, you will need to delete a card before registering a new one.
For more detailed instructions and information on other operations such as deleting cards and setting the baud rate, please refer to the product description and serial communication protocol provided in the manual.
បន្ថែមមតិយោបល់ថ្មី។