សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 12 ខែមករា ឆ្នាំ 2025 - ម៉ោង 11:20 យប់
ដើម្បីភ្ជាប់ កម្មវិធីបម្លែង ATC-1000 TCP-IP ទៅ RS232-422-485 ទៅកាន់កុំព្យូទ័ររបស់អ្នក អ្នកនឹងត្រូវអនុវត្តតាមជំហានទាំងនេះ៖
1. RS-232 Connection: Use a DB9 male-to-male cable to connect the ATC-1000's RS-232 port to your computer's RS-232 port. Connect the pins as follows:
- PIN2 (ATC-1000) to RXD (computer)
- PIN3 (ATC-1000) to TXD (computer)
- PIN5 (ATC-1000) to GND (computer)
- PIN7 (ATC-1000) to RTS (computer)
- PIN8 (ATC-1000) to CTS (computer)
2. RS-422 Connection: Use a terminal block to connect the ATC-1000's RS-422 terminals to your RS-422 device. Connect the terminals as follows:
- Terminal 1 (ATC-1000) to T+
- Terminal 2 (ATC-1000) to T-
- Terminal 3 (ATC-1000) to R+
- Terminal 4 (ATC-1000) to R-
- Terminal 5 (ATC-1000) to VIN
- Terminal 6 (ATC-1000) to GND
3. RS-485 Connection: Use a terminal block to connect the ATC-1000's RS-485 terminals to your RS-485 device. Connect the terminals as follows:
- Terminal 1 (ATC-1000) to 485+
- Terminal 2 (ATC-1000) to 485-
- Terminal 5 (ATC-1000) to VIN
- Terminal 6 (ATC-1000) to GND
4. Connect to 10/100M: Connect the ATC-1000's 10/100M port to a switch or hub using a straight-through Ethernet cable.
5. Power Supply: Power the ATC-1000 by connecting its power adapter (9V) to a power source or use an alternative DC power source.
សូមយោងទៅ កម្មវិធីបម្លែង ATC-1000 TCP-IP ទៅ RS232-422-485 សៀវភៅណែនាំអ្នកប្រើប្រាស់ សម្រាប់ការណែនាំលម្អិត និងរូបភាពបន្ថែម។
បន្ថែមមតិយោបល់ថ្មី។