សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 08 ខែមករា ឆ្នាំ 2025 - ម៉ោង 07:21 ព្រឹក
ដើម្បីភ្ជាប់របស់អ្នក។ Dell 2400MP projector ទៅកាន់កុំព្យូទ័រ ឬឧបករណ៍ផ្សេងទៀត សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Ensure that both the projector and the device you want to connect are powered off.
2. Locate the appropriate video cable for your device. The Dell 2400MP projector supports various video input connections, including VGA, S-Video, Composite Video, and Component Video.
3. Connect one end of the video cable to the corresponding video output port on your device. For example, if you are using a VGA cable, connect it to the VGA output port on your computer.
4. Connect the other end of the video cable to the corresponding video input port on the projector. The video input ports are located on the back panel of the projector.
5. Once the video cable is securely connected, power on both the projector and the device.
6. On the projector's remote control or control panel, press the "Source" or "Input" button to select the appropriate input source. Use the arrow keys to navigate and the "Enter" button to confirm your selection.
7. If necessary, adjust the projector's settings to optimize the display. Refer to the user's guide for detailed instructions on adjusting settings such as brightness, contrast, and aspect ratio.
Note: Depending on the device you are connecting, you may also need to adjust the display settings on your computer or other devices to ensure compatibility with the projector.
សម្រាប់ព័ត៌មានលម្អិត និងគន្លឹះដោះស្រាយបញ្ហា សូមចូលទៅកាន់គេហទំព័រ Dell 2400MP projector's user's guide ផ្តល់ជូននៅក្នុងតំណភ្ជាប់ខាងលើ។
បន្ថែមមតិយោបល់ថ្មី។