សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 06 ខែមករា ឆ្នាំ 2025 - ម៉ោង 01:01 ព្រឹក
ដើម្បីភ្ជាប់ទូរស័ព្ទ iPhone របស់អ្នកទៅ ម៉ាស៊ីនបញ្ចាំងរូបភាព DBPOWER RD828 using WiFi, follow these steps:
1. Make sure both your iPhone and the projector are connected to the same WiFi network.
2. On the projector's main interface, select the "Settings" icon in the upper-right corner.
3. Press the "OK" key on the remote control to enter the settings interface.
4. Select the "WiFi Setting" sub-menu.
5. In the list of available WiFi networks, select the network you want to connect to.
6. ប្រសិនបើត្រូវបានសួរ សូមបញ្ចូលពាក្យសម្ងាត់សម្រាប់បណ្តាញ WiFi ។
7. Once the connection is established, you should see a confirmation message on the projector.
8. On your iPhone, open the Control Center by swiping down from the top-right corner (on iPhone X or later) or swiping up from the bottom (on older iPhone models).
9. Tap on the "Screen Mirroring" or "AirPlay" option.
10. A list of available devices will appear. Select the name of the ម៉ាស៊ីនបញ្ចាំងរូបភាព DBPOWER RD828.
11. Your iPhone screen should now be mirrored on the projector.
Note: The fluency of screen mirroring with wireless connection may be affected by the network environment. It is recommended to have a bandwidth of 100Mbps or more for optimal performance. Also, make sure your iPhone is in close proximity to the projector, within 1 meter.
សូមយោងទៅមគ្គុទ្ទេសក៍អ្នកប្រើប្រាស់សម្រាប់ការណែនាំលម្អិតបន្ថែម និងគន្លឹះដោះស្រាយបញ្ហា។
បន្ថែមមតិយោបល់ថ្មី។