សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 01 ខែមករា ឆ្នាំ 2025 - ម៉ោង 02:35 ព្រឹក
ប្រាកដណាស់! នេះជាការណែនាំជាជំហាន ៗ អំពីរបៀបតំឡើង NETGEAR EX2700 Wi-Fi Range Extender:
1. Plug in the extender: Plug the extender into an electrical outlet near your Wi-Fi router.
2. Connect to the extender: On your computer or mobile device, go to the Wi-Fi settings and connect to the network named "NETGEAR_EXT".
3. បើក ក web កម្មវិធីរុករក៖ បើកដំណើរការ a web browser and enter "www.mywifiext.net" in the address bar. Press Enter.
4. Create an account: If prompted, create a new account by following the on-screen instructions. If you already have a NETGEAR account, log in with your credentials.
5. Select your Wi-Fi network: The extender will scan for available Wi-Fi networks. Select your existing Wi-Fi network from the list and click "Next".
6. Enter your Wi-Fi password: Enter the password for your Wi-Fi network and click "Next".
7. Configure the extender: You can choose to use the same Wi-Fi network name (SSID) and password as your existing network, or you can customize them. Make your selection and click "Next".
8. Connect devices: Once the extender is configured, you can connect your devices to the extended Wi-Fi network. Go to your device's Wi-Fi settings and connect to the new network name (SSID) you set up.
That's it! Your NETGEAR EX2700 Wi-Fi Range Extender is now set up and ready to use. You should now have extended Wi-Fi coverage in your home. If you encounter any issues during the setup process, refer to the user manual for troubleshooting steps or contact NETGEAR support for assistance.
បន្ថែមមតិយោបល់ថ្មី។