សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 28 ខែធ្នូ ឆ្នាំ 2024 - ម៉ោង 12:59 ព្រឹក
ដើម្បីផ្គូផ្គង SoundBot SB221 Bluetooth headset ជាមួយឧបករណ៍របស់អ្នក សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Make sure the headset is charged. Charge the headset for at least 2 hours using the provided charging cable.
2. Turn on your device's Bluetooth function.
3. Press and hold the multifunction button on the headset for 7-9 seconds until the LED alternately flashes between red and blue.
4. On your device, go to the Bluetooth settings and search for new devices.
5. Select the SB221 from the list of available devices.
6. ប្រសិនបើត្រូវបានសួរ សូមបញ្ចូលលេខកូដ PIN "0000" ដើម្បីបញ្ចប់ដំណើរការផ្គូផ្គង។
7. The SB221 will beep to confirm that it has successfully paired with your device.
If the pairing is unsuccessful, try the following:
- Make sure the headset is in pairing mode (LED flashing red and blue).
- Restart the pairing process on your device.
- If the issue persists, power off the headset by pressing and holding the multifunction button for 4 seconds, then repeat the pairing process from step 3.
- If you still have trouble, contact SoundBot support at support@volcus.com for further assistance.
សូមយោងទៅមគ្គុទ្ទេសក៍អ្នកប្រើប្រាស់សម្រាប់ការណែនាំលម្អិតបន្ថែម និងគន្លឹះដោះស្រាយបញ្ហា។
បន្ថែមមតិយោបល់ថ្មី។