សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 22 ខែធ្នូ ឆ្នាំ 2024 - ម៉ោង 09:10 ព្រឹក
ប្រាកដណាស់! នេះគឺជាការណែនាំជាជំហាន ៗ អំពីរបៀបតំឡើង WICHEMI Style 6 LED Lighttop Fountain:
1. Unbox the Fountain: Carefully take the fountain and all of its parts out of the box.
2. Check Components: Make sure you have everything you need, including the fountain base, the underwater pump, the LED light, and any other extras.
3. Place the Fountain: Pick a good spot for the fountain on a flat, stable surface.
4. Install the Pump: Put the hidden pump inside the base of the fountain and make sure it fits correctly.
5. Connect the LED Light: When you're ready to use the LED light, connect it to the right spot in the pond.
6. Fill with Water: Fill the fountain with water until it has reached the right amount and covers the pump.
7. Connect the Power Cord: Connect the power cord to a normal wall outlet and plug in the fountain.
8. Turn on the Fountain: To start the water flow and LED light, turn on the fountain.
9. Change the Flow of Water: If there are any settings available, change the water's flow rate to your liking.
10. Check for Leaks: Make sure the waterfall doesn't have any leaks or drips.
11. Place the Fountain: If necessary, move the fountain around to make sure it is stable and in the right place.
12. Watch How It Works: Keep an eye on the fountain to make sure it works right and the water flows easily.
13. Add Decorations: If you want to make the pond look better, you can add any other decorations you want around it.
14. Regular Refilling: Check the water level often and fill up as needed to keep the system working right.
15. Cleaning: If you need to, clean the ទឹកធ្លាក់ every so often to get rid of any dirt or minerals that have built up.
សូមមើលសៀវភៅណែនាំអ្នកប្រើប្រាស់សម្រាប់ការណែនាំលម្អិត និងការប្រុងប្រយ័ត្នសុវត្ថិភាព។
បន្ថែមមតិយោបល់ថ្មី។