សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 13 ខែធ្នូ ឆ្នាំ 2024 - ម៉ោង 01:47 ព្រឹក
To inflate a car tire using the AVID POWER ACAP322 Dual Power Inflator/Deflatorសូមអនុវត្តតាមការណែនាំជាជំហានៗទាំងនេះ៖
ជំហានទី 1: ជ្រើសរើសការផ្គត់ផ្គង់ថាមពល
- If you are using the 12V DC power supply, insert the cigarette plug into your car's cigarette lighter socket.
- If you are using the 120V AC power supply, insert the 120 Volt AC power cord into a grounded 120 Volt AC outlet.
ជំហានទី 2: ភ្ជាប់ Air Chuck ទៅនឹង Valve Stem
- Push the air chuck clamp ឡើងដើម្បីដោះសោវា។
- Place the air chuck on the valve stem of your car tire, ensuring that the threaded section of the valve stem is inside the air chuck.
- Press the air chuck clamp ចុះក្រោមរហូតដល់វាឈប់ ឬស្របជាមួយនឹងបំពង់ខ្យល់។
Step 3: Set the Pressure Value
- Press the "PSI" button on the inflator to read the current tire pressure on the digital gauge.
- Press the "PSI" button again to select the tire pressure measurement unit (PSI, KPA, BAR).
- Press the "+" or "-" button to set the desired pressure for your car tire.
- The digital display will flash the set pressure value three times and then revert to displaying the current pressure value, indicating that the preset value has been successfully set.
Step 4: Choose High-pressure Mode
- Press the mode power switch to the right to activate the high-pressure mode for inflating car tires.
Step 5: Inflate the Tire
- The inflator will start inflating the tire automatically.
- Monitor the digital gauge to ensure that the tire pressure reaches the desired preset value.
- Once the preset pressure is reached, the inflator will automatically stop working.
Note: If you want to stop the inflator before reaching the preset pressure, simply switch the high-pressure mode or the AC/DC power switch to the neutral position.
សូមយោងទៅ AVID POWER ACAP322 Dual Power Inflator/Deflator សៀវភៅណែនាំអ្នកប្រើប្រាស់ សម្រាប់ការណែនាំលម្អិតបន្ថែមទៀត និងការប្រុងប្រយ័ត្នសុវត្ថិភាព។
បន្ថែមមតិយោបល់ថ្មី។