សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 09 ខែធ្នូ ឆ្នាំ 2024 - ម៉ោង 03:50 ព្រឹក
To change the measurement function on the ឧបករណ៍វាស់ឌីជីថល HANNATEK DM20អនុវត្តតាមជំហានទាំងនេះ៖
1. Locate the dial on the front of the multimeter. This dial is used to select the measurement function.
2. Turn the dial to the desired measurement function. The available options include voltage, current, resistance, continuity, and NCV (non-contact voltagង) ។
3. Once you have selected the desired measurement function, the multimeter is ready to take measurements in that specific mode.
Note: Make sure to familiarize yourself with the symbols and abbreviations used on the dial to identify the different measurement functions. Refer to the operating manual for a detailed explanation of each function and its corresponding symbol.
It is important to use the appropriate measurement function for the specific electrical parameter you are trying to measure. Using the wrong function may result in inaccurate readings or potential damage to the ពហុម៉ែត្រ or the circuit under test.
បន្ថែមមតិយោបល់ថ្មី។