សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 09 ខែធ្នូ ឆ្នាំ 2024 - ម៉ោង 01:43 ព្រឹក
ដើម្បីវាស់វ៉ុល ACtage with the , follow these steps:
1. Insert the red test lead into the "Input" jack and the black test lead into the "COM" jack.
2. Turn on the Multimeter by setting it to "Continuity Test". Touch the test lead tips together to check if they are connected normally. An audible sound should occur.
3. Turn the rotary dial to the Voltage test setting. Note that the Meter defaults to DC Voltage, so use the "Select" button to reach the AC Voltage test. "AC" will be displayed on the screen.
4. Connect the two test leads to the neutral and live wires respectively (red to live, black to neutral).
5. បន្ទាប់ពីការអានមានស្ថេរភាព សូមកត់ត្រាការអានពីអេក្រង់ LCD ។
6. បើកកុងតាក់បង្វិលទៅទីតាំង OFF ដើម្បីបិទម៉ែត្រ។
Note: Make sure to pay attention to the voltage ការកំណត់របស់ ពហុម៉ែត្រ and use the "Select" button to choose the correct setting. Also, be aware of the maximum voltage rating of the Meter to avoid damage.
បន្ថែមមតិយោបល់ថ្មី។